Medical Grade Water and Hospital Systems

Produce high purity water for stringent standards or increase treatment efficiency.

We provide custom medical grade water treatment systems that integrate with your current water treatment solutions or are apart of an entirely new water treatment system. Purified water is an essential resource in all medical and hospital environments. Water is often the major component in many diverse applications. Our medical water treatment experts can answer any questions or concerns you have.

Request a free water consultation.

We have provided quality water treatment products and services to the healthcare industry for over 70 years. We specialize in the following healthcare water quality systems: laboratory grade water, analyzer feed systems, dialysis clinics, specimen processing equipment, washer-decontaminators and boiler feed systems.

Hospital Water Applications

For medical applications, whether its hemodialysis, decontamination washers, clean sterilizer reuse, analyzer equipment, food service, or the boiler room, Total Water Treatment specializes in producing high purity water systems and delivering unique filtration and disinfection products for these diverse processes.

Each application has its own set of requirements, which will challenge our team of expert engineers to create a solution that is customized to meet your needs. Whether we are reducing blow downs for your boiler application, providing type I water according to the CLRW/CAP standard, or water to meet the AAMI Standard, Total Water Treatment will handle all of your water treatment needs.

Medical and Hosptial Water Technologies

Total Water can design and install a system utilizing existing and emerging technologies to give you the water quality to meet your standards. We also offer Validation support for the equipment and material we supply.

Medical and Hospital Water Services

High purity water filtration systems require more stringent maintenance practices to ensure consistent and reliable water quality. We know that a problem with your high purity system can mean business delays, so our service technicians are available 24/7 to deal with unforeseen issues either in person or over the phone.

  • Service Contracts
  • CAD Drawings
  • Repairs
  • Sanitization
  • Laboratory Analysis

CLRW and SRW Quality Water Systems

Water is the most commonly used solvent in laboratories and constitutes often more than 99% of the mass of solutions used in experimentations. The quality of water used in the lab is therefore critical for the success of the tests performed.

Water quality will depend on the proper selection, design and efficiency of the technologies used to purify water and on the accuracy and the sensitivity instruments used to monitor water contaminants levels. Stringent Quality Insurance (Certification, Calibration, Qualification and validation) is mandatory to ensure that water purification and monitoring techniques are properly incorporated in manufactured products in order to deliver the expected end result.

The purification of water has also a cost and in order to optimize the operating cost of a laboratory while maintaining adequate technical standards, it is important to use the right water quality for each application.

Ultrapure (Type I) Water Systems

Ultrapure (Type 1) water is recommended for critical laboratory applications including advanced analytical techniques or cell culture and molecular biology experimentations. It should be produced on demand to immediately produce solutions as water at this level of purity will quickly pick up contaminants from the lab atmosphere as well as from the container in which it is poured.

Total Water systems are engineered to produce ultrapure (Type I) water. Some can operate directly from tap (potable) water and others from pure water. The selection of the proper ultrapure water system for your laboratory will depend on several parameters such as: feed water available in the laboratory, instant and daily volumes needs of ultrapure water or ultrapure and pure water, the quality of monitoring of water quality and the level of certification required and several other points.

Pure (Type II) Water Systems

Pure (Type 2) water is recommended for regular applications in the laboratory such as the production of buffers or the final washing of glassware. Type 2 water can be conveniently stored in optimized storage devices. It is economically produced using the electrodeionisation process in which a weak electric current permanently regenerates mixed bed ion-exchange resins.

The selection of the right pure water system for your laboratory will depend on several parameters such as: instant and daily volumes needs of pure water, the quality of monitoring of water quality and the level of certification required and several other points.

Pure (Type III) Water Systems

Pure (Type 3) water is acceptable for non critical applications such as the feed to autoclaves or filling of heating baths. It is generally produced by reverse osmosis.

The selection of the right pure water system for your laboratory will depend on several parameters such as: instant and daily volumes needs of pure water, the quality of monitoring of water quality and the level of certification required and several other points.

Clinical Water Systems

Clinical Water systems produce high purity water meeting the NCCLS and CAP standards and are specifically designed to feed clinical analyzers.

Free Water Analysis and Consultation

Total Water's certified water experts can assist you with your water treatment needs. We can answer any questions, concerns, provide different options, quotes, service info or anything else you might need. Just tell us a little about yourself to request a consultation.